Exterior Concrete Resurfacing for broom or spray down finish

Uberdek is a single component polymer modified concrete formulated to resurface existing indoor or outdoor concrete surfaces. It is a very cost-effective solution to expensive and time consuming concrete replacement. Uberdek can be used to restore stained or pitted concrete surfaces. It can be pigmented with Colorfast colors or topically colored with Pellucid Dyes. Uberdek can be applied in numerous decorative applications including spray down, knock down or cool deck type finishes. Uberdek can also be used with Duraamen Stencils to create stencil concrete surfaces. It is suitable for interior or exterior use that can withstand to freeze-thaw environment. Uberdek is sealed with Dekguard or Polyaspartic polyurea based coating, Perdure P72.

  • Single component – just mix water on site
  • Specialty polymers promote excellent bond to the existing concrete substrate
  • Self curing, no additional curing methods needed
  • Versatile - allowing for decorative trowel and broom finishes
  • Demonstrates excellent freeze/thaw stability
  • Compatible with most sealers, dyes and stains
  • Quick turnaround, ready for foot traffic in two hours
  • Provides a slip-resistant surface
  • Zero VOC
Working Time 20 min @ 70°F Compressive strength (ASTM C 109) 1 Day 2400psi
Initial Set 60 min @ 70°F Compressive strength (ASTM C 109) 7 Days 3600psi
Mixing Water 4.0 – 5.5 quarts of water for 50lb bag Compressive strength (ASTM C 109) 28 Days 5000psi
Shelf Life 12 months when properly stored Flexural Strength 1000psi
Shelf life 6 months
  • Commercial and residential applications, vehicular and foot traffic
  • Resurfacing Driveways, Garage floors, Patios, Pool decks and Walkways
  • Textured 'skip-trowel finishes
  • Resurfacing of old concrete retaining walls
  • Dressing up worn or spalled concrete to provide a brand new finish

You may also be interested in: