Seamless Epoxy Flooring System for Concrete Substrates
Perdure SLE, self-leveling epoxy flooring system is a seamless, low maintenance, epoxy mortar system that results in a dense, non-porous floor that is chemical and abrasion resistant. It is ideal for light to medium traffic areas. It is typically installed between 1/16” to 1/8” thickness. This self-leveling epoxy system can be top coated with polyurethane or polyaspartic polyurea coatings to enhance abrasion resistance, gloss retention and abrasion resistant properties. To increase the coefficient of friction (make it non-slippery), non-skid additive can be introduced in the topcoat. Perdure SLE can be installed with integral cover base for areas requiring seamless wall to floor coatings.
| || |
1000sq.ft. at 1/16" thickness
Note that the estimate below is based upon standard application rates and methods. On site application rates may vary depending upon the site conditions and application methods.
- Perdure E02 – 4.0gallons
- Perdure E10 – 25.0gallons
- Self-leveling Additive – 450lb
- Perdure E20* – 9 gallons (Optional)
*For Chemical Resistance, replace Perdure E20 with Perdure NE25
Top coat – Choose any one of the following
- Perdure U45 (matte) – 3.0gallons
- Perdure U46 (gloss) – 3.0gallons
- Perdure U90 (gloss or satin) – 3.0gallons
- Perdure P72 (gloss) – 2.0 gallons