Perdure U46

water-based non-yellowing polyurethane sealer (gloss)

Perdure U46 is a two-component water-based aliphatic (non-yellowing) polyurethane. Perdure U46 is free of the health and environmental problems normally found in solvent-based urethanes, while maintaining excellent performance properties. It is a high performance coating for use in variety of seamless floor and wall coating systems.

Perdure U46 gives a gloss finish. Perdüre U46 has good chemical, stain, and mar resistance. In addition, it’s easy to clean and has excellent color retention under heavy foot traffic. It is ideal for topcoats and finishes that require high abrasion resistance. Typical application areas are clean rooms, hospitals, pharmaceutical facilities, stained concrete, wood floors and as a seal coat for most düraamen’s floor and wall coating systems.

Viscosity after 15 minutes @ 77°F 500 – 600cps Pot Life 1 ½ - 2 hr @ 77°F, 1qt 45min @ 95°F, 1qt
Viscosity after 30 minutes @ 77°F 600cps Dry to Touch 2hours @77°F, 50%RH
Mixing Ratio - Clear 4 parts A to 1 parts B by volume Re-Coat 4 hours @ 77°F 50%RH
Solids Content Clear 43% by volume Light Traffic 16-24 hours @ 77°F
VOC <0.10 lb/ga Full Cure 4-5 days
  • Low odor during application and cure
  • Fast dry and re-coat time
  • Low VOC
  • Excellent adhesion
  • Excellent abrasion resistance

You may also be interested in: