Perdure P90

High solids polyaspartic polyurea coating

The use of Polyaspartic chemistry for finish coats represents an exciting entry into a new coating technology for floor sealing and coating applications. Polyaspartics enhance the use of conventional two-component aliphatic polyurethane technology by providing faster dry times and higher film builds. The fast-drying characteristics of Polyaspartics translate into a rapid return to service, and high film build makes it possible to reduce number of coats while maintaining the same overall thickness. These improvements all add up to improve the overall productivity of the application process.

Perdure P90 is a two component, ultra high solids, aliphatic Polyaspartic polyurea designed to provide high gloss, UV stable (non-yellowing) and chemical resistant protection. It is a superior, new generation product exhibiting fast cure and excellent stain resistance.

Perdure P90 has very low odor and can be applied indoors in occupied areas. It is generally used as a clear, high gloss finish on düraamen’s flooring systems.

  • Excellent abrasion resistance
  • Excellent chemical and stain resistance
  • Suitable for both exterior and interior applications
  • May be used for both horizontal and vertical applications
Viscosity @ 75°F 350 – 400cps Pot Life 20 minutes
Mixing Ratio 2 parts A to 1 parts B by volume Dry to Touch 2.5 hours @ 75°F
Solids Content 95-97% by volume Re-Coat 4 hours @ 75°F
VOC 35.8 gm/L Light Traffic 4 – 5 hours @ 75°F
Weight Per gallon 8.77 pounds per gallon, mixed Heavy Traffic 48 hours
Tensile strength ASTM D412 3000 – 4000
Hardness Shore D 24hr 25 – 30

You may also be interested in: