Perdure P72

polyaspartic polyurea topcoat

Perdure P72 is a new generation fast-curing, two component, polyaspartic aliphatic polyurea formulated to be used as a sealer or topcoat for interior or exterior use over properly prepared concrete or resinous flooring systems. It has excellent penetration and bond strength to properly prepared surfaces, UV resistant, and abrasion, impact, and wear resistant.

  • Self-priming, excellent penetrating to achieve excellent bond strength
  • Superior abrasion, impact and wear resistance
  • Excellent hot tire pickup resistance
  • UV resistance, does not turn ‘yellow’ or ‘amber’
  • Reduces floor care, cleaning and maintenance costs
  • Low temperature cure
Viscosity @ 75°F 250-300cps Pot Life 20 minutes
Mixing Ratio 1:1 Dry to Touch 2.5 hours @ 75°F
Solids Content 72% by volume Re-Coat 4 hours @ 75°F
VOC 0 Light Traffic 4–5 hours @ 75°F
Tensile Strength, ASTM D638 5000psi Heavy Traffic 48 hours
Abrasion Resistance, ASTM D968 30liters sand/1 dry mil

You may also be interested in: