Perdure FE80

Flexible Epoxy Membrane for Crack Isolation and Waterproofing

Perdure FE80 is flexible urethane modified epoxy used as a crack isolation membrane under various Duraamen flooring systems. Perdure FE80 resists cracking caused by horizontal substrate movement, providing a crack resistant, resilient, sound absorbent, waterproof, durable floor. When it is used with various flooring systems it offers stress-relieving properties for floor slabs that show movement or vibration. Perdure FE80 is also used to treat the surface of individual cracks and properly filled and covered contraction joints (saw cuts). It is available in a wall grade formulation.

  • Crack Resistant – Flexibility Allows Horizontal Substrate
    Movement, Aids in Suppression of Reflective Cracking From
    Substrate
  • Advanced Technology Maintains Flexibility in Cold
    Temperatures
  • Increased Tensile and Bonding Strength Versus Epoxy-Only
    Membranes
  • Higher Compressive Modulus Provides Greater Support for
    Heavy Point Loads Versus Softer Membranes
  • Optional Scrim Cloth Reinforcement
  • VOC < 25 g/L, Meets USGBC LEED Criteria and All VOC
    Regulations Including Los Angeles SCAQMD
  • Low Odor for Use in Occupied Areas
  • Ultimate Elongation of 140–150%
  • Reduces Noise Created by Mechanical Vibrations
  • Meets USDA Requirements
Working Life (spread on substrate) 25–30 min. Cure Time, Tack Free 10–12 hours @ 75°F
Recoat Time 12–48 hours @ 75°F Full Set Time 48–72 hours
Full Cure 5–10 days Thermal Cycling ASTM C884 No Cracking
Flammability ASTM D635 Concrete Surfaces Impact Resistance ASTM D2794 16 ft.lb.
Hardness Shore D ASTM D2240 60–75 Hardness Shore A ASTM D2240 70–80
VOC Content ASTM D2369 (EPA Method 24) < 25 g/L Adhesion (unprimed) ACI 503R, ASTM D7234 300+% concrete failure varies by concrete strength
Tensile Strength ASTM D412 1,650 psi Ultimate Elongation ASTM D412 140–150%

You may also be interested in: