Perdure E32

water-based epoxy flooring primer/sealer

It is a water based emulsion epoxy flooring primer/sealer designed to have a maximum penetration into concrete surfaces to provide high bond strength and adhesion. Specially formulated to reduce concrete out gassing, Perdure E32 has the ability to be applied to recently poured (green) concrete and achieve excellent adhesion. Perdure E32 has very low odor and can be used in occupied areas. Ideal for both new and old concrete surfaces, Perdure E32 is used as a primer for Perdure high build and thin film coating systems.

Viscosity @ 75°F 300 – 400cps Pot Life 3 hours
Mixing Ratio 2 parts A to 1 parts Bby volume Dry to Touch 4 – 6 hours @ 75°F
Solids Content 38-40% by volume Re-Coat 6 – 24 hours @ 75°F
VOC <60 gm/L Light Traffic 24 hours @ 75°F
Bond Strength to concrete 400-500psi (100% concrete failure) “H” hardness 2 days
Weight Per gallon 8.75 pounds per gallon, mixed “5-H” Hardness 30 days
  • Low odor during application and cure
  • Fast dry and re-coat time
  • Easy clean-up
  • Can be used on damp/green concrete
  • Greatly reduces the probability of concrete out gassing

You may also be interested in: