Perdure E02

100% solids epoxy primer

Perdure E02 is a 100% solids epoxy primer for concrete and masonry surfaces. It combines the properties of water insensitivity with good wetting properties. It provides excellent filling and sealing properties needed under high performance epoxy floor coatings on concrete. The moisture tolerance of perdüre E02 allows it to be applied to damp concrete after surface preparation. This includes bonding “old to old” or “new to old” concrete.

  • Low modulus – stress relieving
  • Fast cure formulation available for priming under coatings
  • Moisture insensitive cure
  • Conforms to ASTM C-881 requirements
  • Low viscosity-good wetting properties
Viscosity @ 75°F 400 – 450cp Pot Life 30-40 minutes @ 75°F
Mixing Ratio 2 parts A to 1 parts B by volume Dry to Touch 6–8 hours @ 75°F
Solids Content 100% Solids by volume Re-Coat (regular cure) 10–12 hours @ 75°F
Volatile Organic Content 0 Re-Coat (fast cure) 4-6 hours @ 75°F
Gloss, 60°F Low sheen Full cure, maximum resistance 5 Days
Weight Per gallon 9.00–9.50 pounds per gallon, mixed

You may also be interested in: