Sales, Information, and Customer Support

Note: Please enable Javascript to use this contact form. Learn how here.

Contact us 1.866.835.6595 Düraamen

industrial coatings and polished concrete flooring systems

Acrylic Concrete Sealers

Perdüre A01 | clear acrylic sealer

Perdüre A01 is a clear acrylic solution formulated to create a clear, non-yellowing protective coating that provides a tough, UV and abrasion resistant film protecting surfaces from moisture penetration, staining, dirt, dust and wear. Perdüre A01 is an excellent choice for both interior and exterior applications.

Most commonly used as a sealer for Düraamen concrete, epoxy terrazzo and polymeric terrazzo flooring systems. It is also used for sealing old and new concrete floors, exterior ramps, decks, sidewalks, slate and exposed aggregate surfaces.

advantages

  • UV resistant
  • Excellent clarity & colour retention
  • Low maintenance finish
  • Excellent abrasion & Mar resistance
  • Seals substrate from moisture penetration

Technical Data

Viscosity @ 75°F 950cps Weight per gallon 7.50–8.0lb/ga
Mixing ratio none Dry to touch 2-6 hours @ 75°F
Solids Content 20% by volume Re-Coat 2-6 hours @ 75°F
VOC 746g/lt Full Cure 5 days
top of page

Perdüre A03 | UV protective clear acrylic sealer

Perdüre A03 is a clear acrylic emulsion formulated to create a clear, non-yellowing, protective coating. It provides a tough, UV and abrasion resistant film that protects surfaces from moisture penetration, staining, dirt, dust, wear, and provides a surface that is easy to clean and maintain. Perdüre A03 is an excellent choice for both interior and exterior applications.

The excellent water, alkali, and efflorescence resistance of this product, in combination with its exterior durability and its ability to adhere to a variety of substrates, allow it to be used in many applications. Perdüre A03 can be used to seal concrete, masonry, pavers, brick, saltillo tiles, or any cementitious substrate.

advantages

  • Hot tire pick-up resistant
  • UV resistant
  • Waterborne sealer
  • Excellent clarity & colour retention
  • Low maintenance finish
  • Fast dry time
  • Excellent abrasion & Mar resistance
  • Seals substrate from moisture penetration

Technical Data

Weight / gallon 8.5 ± 2 pH 8.5 – 8.9
Solids Weight 20.0% Drying time 15-30 minutes
VOC 0.60 gm/liter Re-Coat 2 hour (approx.)
Flash point None (seta flash) Package life 1 year, unopened
top of page

Knowledge & Inspiration