Perdure SLE Epoxy Flooring System

Self-leveling, Seamless Epoxy Flooring System for Concrete Substrates

Self-leveling, Seamless Epoxy Flooring System for Concrete Substrates

Perdure SLE, self-leveling epoxy flooring system is a seamless, low maintenance, epoxy mortar system that results in a dense, non-porous floor that is chemical and abrasion resistant. It is ideal for light to medium traffic areas. It is typically installed between 1/16” to 1/8” thickness. This self-leveling epoxy system can be top coated with polyurethane or polyaspartic polyurea coatings to enhance abrasion resistance, gloss retention and abrasion resistant properties. To increase the coefficient of friction (make it non-slippery), non-skid additive can be introduced in the topcoat. Perdure SLE can be installed with integral cover base for areas requiring seamless wall to floor coatings.

  • High wear, impact and abrasion resistance
  • Very low maintenance
  • Safe (slip resistant finish)
  • Zero to Very Low VOC
  • Designed for Chemical Resistant
  • Various protective topcoats available for Light, Medium and Heavy traffic
  • Offices
  • Retails Stores
  • Restaurants
  • Meeting rooms
  • Museums
  • Warehouses
  • Utility Rooms
  • Light manufacturing plants
  • Public Rest rooms
  • Laboratories
  • Lobby Areas
  • Shower Rooms
  • Classrooms
  • Cafeterias

1000sq.ft. at 1/16" thickness

Note that the estimate below is based upon standard application rates and methods. On site application rates may vary depending upon the site conditions and application methods.


  • Perdure E02 – 4.0gallons


  • Perdure E10 – 25.0gallons
  • Self-leveling Additive – 450lb
  • Perdure E20* – 9 gallons (Optional)

*For Chemical Resistance, replace Perdure E20 with Perdure NE25

Top coat – Choose any one of the following

  • Perdure U45 (matte) – 3.0gallons
  • Perdure U46 (gloss) – 3.0gallons
  • Perdure U90 (gloss or satin) – 3.0gallons
  • Perdure P72 (gloss) – 2.0 gallons

Recommended Tools