Self-Leveling Concrete Products

Self-leveling concrete products consists of a blend of Portland and/or calcium aluminate cements, inorganic aggregates, co-polymers, and chemical modifiers, which form a flowable, self-leveling compound for leveling interior or exterior substrates. These component form a high compressive strength and flowable cementitious compound, resulting in a flat-surface that accepts ceramic tiles, natural stone, hardwood flooring, VCT, linoleum or concrete overlays. Self-leveling concrete products sold today are mixed with water only; no liquid acrylic-latex additive is required. The dry re-dispersible co-polymers in the formulations provide improved bond strength with various substrates, Self-leveling concrete products are formulated with proprietary copolymers and cements, which provide very high compressive strengths within a very short period of time after they are installed. The high compressive values results ina floor assembly that consistently passes all 14 cycles on an ASTM C627 Robinson Floor test for most applications. This 'Extra Heavy Duty; rating for the finished floor is crucial for floros that are subjected to heavy foor traffic and large equipment such as scissor lifts and pallet jacks. Alternative self-leveling applications, sucha s those over hydronic tubing or electric radiant heat systems. Installations over wood joist /plywood subfloor installations can provide a light commercial to a standard residential service depending upon the specific assembly detail.

The versatility of cement based self-levelers allows for self-leveling concrete pours that can be applied from 1/4" to 1.5" in a single pass. Self-leveling concrete products can also be feather-edged to transition other floor finishes. Allowable thickness vary depending upon the specific formulation. Certain proprietary formulations are available that provide an extended set for pumping. These are designed for use in high ambient temperature conditions, or over large spans when more time to float the material is required. The cure rates of self leveling concrete materials provide for a fast setting underlayment or overlayment that can accept tiles or hardwood floors in as little as 4 hours and 14-18 hours for resilient flooring or concrete microtoppings after the concrete is in place. This helps to minimize project downtime and allows the work schedule to proceed more expeditiously.

CLICK HERE to watch the complete installation process of self-leveling concrete floor.

Duraamen industrial and polished concrete flooring products are designed to provide labor saving, longer lasting flooring solutions. Talk to an expert by dialing +1.973.230.1301 about your flooring challenges and explore various cost saving and durable flooring options.

You might also be interested in…

Decorative Concrete Toppings – Proper Surface Preparation and Installation

Decorative concrete toppings can be installed over any existing hard surface floor covering like ceramic tiles, slate, marble, VCT, etc., sometimes even without removing them. These concrete toppings are colored ...

Read more

Why mix ratios are important for Epoxy coatings?

We have come across many times where contractors made a mistake in mixing the two components of an epoxy or polyurethane coating. Some of the common problems that occur of ...

Read more

Decorative Concrete Flooring in Omaha, NB

Decorative Concrete Flooring by Serfacewerks of Omaha Nebraska Serfaceweks of Omaha Nebraska owned by Matthew Dethlefs completed this basement floor restoration using our Skraffino decorative concrete flooring system. Skraffino is ...

Read more

​Benefits of High Build Floor Coatings

There are a variety of concrete floor coatings available, but choosing the correct type and the application method requires an understanding of the individual floor coatings. One popular option in ...

Read more