How To Resurface Gypsum Subfloor With Concrete Overlay

How To Resurface Gypcrete - Seattle Washington

Before – How To Resurface Gypsum Substrate – Seattle, WA

How To Resurface Gypcrete - Seattle Washington

Before Sealers – How To Resurface Gypsum Concrete – Seattle, WA

How To Resurface Gypcrete - Seattle Washington

After – How To Resurface Gypsum Substrate – Seattle, WA

How To Resurface Gypsum Subfloor With a Duraamen Concrete Overlay?

Very few products have the ability to perform over Gypsum subfloor. Gypsum Concrete is a product used as an underlayment for hardwood, tile or carpet. With our products, concrete overlays can be added to the list. Gypsum concrete is a lightweight product but very porous and typically soft. However over the years the PSI of gypsum based products has increased.

Resurface Gypsum Subfloor By Seattle Surfaces of Seattle Washington

The project was completed for Five Fish Bistro Restaurant by Seattle Surfaces owned by Dave Primc. The 2,000 square foot restaurant was designed by Arellano Christofides Architects PLLC also of Seattle.

When Skraffino is applied to resurface gypsum subfloors, we require that the Gypsum Concrete has a PSI of 3,500 otherwise there is a risk of pinholes bleeding through the surface and denting in the future.

Skraffino is an amazing user friendly product for resurfacing concrete and many other substrates. When properly primed, the Skraffino has exceptional bonding characteristics. In fact, Skraffino has been used to resurface porcelain bathtubs that are used daily, holding up to water, soap and shampoo without delamination.

When resurfacing gypsum sub-floor, the process is extra priming with CP 1000 our priming polymer. In this case, 3 coats of Skraffino were applied using our Potters Clay integral colorant. As you can see in the photos, the result is excellent. The floor is seamless, non slip and easy to maintain. It is durable enough to endure the heavy wear and tear of a restaurant.

The seal coats used was our Perdure E32 Water Based Epoxy with Perdure U90 90% solids moisture cured polyurethane, an exceptionally durable top coat.

If you have a gypsum sub-floor and are looking for a solution to resurface the floor, contact us to discuss the options. We have many unique coatings for resurfacing every kind of floor and substrate. Plus we have a nationwide network of flooring professionals who are experienced applicators of our products.

Please CLICK HERE to watch the installation process. Please CONTACT US to discuss your project us.

You might also be interested in…

What is the best flooring system for a food production facility?

Is your food production facility ready to expand? Interest in your food product is high and you’re prospering. Right now, you’re making important decisions about how you will market your ...

Read more

Polished Self-Leveling Concrete Floors, California

Polished concrete flooring is no longer just a durable floor choice for industrial settings and car dealerships. A polished concrete floor is now considered a spectacular showpiece in upscale, contemporary ...

Read more

Lumiere Designer Metallic Epoxy Coatings for Office Spaces, Art Galleries & Clothing Stores

Lumiere Designer Metallic Epoxy Coatings for Office Spaces, Art Galleries & Clothing Stores In environments where look is everything, the Lumiere Decorative Metallic Epoxy Coating System is the ideal solution. ...

Read more

Epoxy Coatings For Marine Showroom Floors

Photos Courtesy of Madstone Floors New Jersey to Massachusetts – Epoxy Coatings for Marine Showroom Floors The photos featured here are a Marine Showroom Floor completed by Madstone Floors. The ...

Read more