Endüra™ is a high performance Grade III resin flooring system designed to be used in garage floors, basement floors, workshop floors, laundry room floors, locker room floors, restaurants, food service areas where return to service is extremely important. This system combines the benefits of Epoxy resins and Polyaspartic technology.

Epoxy resins offer better wet-ability and adhesion to various substrates where as Polyaspartics offer very high abrasion resistance, hot-tire pick up resistance, UV stability and excellent chemical resistance.

endüra™ high performance Grade III resin system

consists of:

a. application of endüra E21—100% solids, pigmented
epoxy coating that is broadcasted with blended colored
resin chips

b. application of endüra P70—clear Polyaspartic top coat

key benefits

• Use of epoxy resins ensures superior wetting and excellent bonding to the substrates
• Epoxy resin designed for moisture insensitive cure
• Excellent abrasion—impact and hot tire pick-up resistance
• Chemical resistance—resists chemicals like brake fluid, gasoline, mek, hydraulic oil, etc.
• UV light stable—superb clarity top coat
• Fast cure—return to service within hours after the application of the top coat
• Zero VOC system

Click here to view application instructions

important!: For successful installation of any resinous flooring systems a concrete surface profile (CSP) of 4 to 5 is recommended. If the installer is unable to achieve the CSP of 4 or 5, application of primer, endüra E02, may be necessary.

Endüra E02 is a 100% solids, moisture tolerant epoxy primer for concrete and masonry surfaces. It combines the properties of water insensitivity with good wetting properties. endüra E02 provides excellent filling and sealing properties needed under high performance epoxy floor coatings on concrete. The moisture tolerance of endüra E02 allows it to be applied to damp concrete after surface preparation. This includes bonding “old to old” or “new to old” concrete.

advantages

• Low modulus – stress relieving
• Fast cure formulation available for priming under coatings
• Moisture insensitive cure
• Conforms to ASTM C-881 requirements
• Low viscosity-good wetting properties

Endüra E21 is a 100% solids, pigmented epoxy floor coating designed to provide high gloss, chemical resistant protection. It is essentially odorless and can, therefore, be used in occupied areas. endüra E21 provides a smooth, high gloss finish or, in a heavy body form, an orange peel, texture finish. It can be broadcasted with resin chips.

advantages

• Low odor during application and cure
• Zero VOC
• Easy application and clean-up

Endüra P70 is a two component, ultra high solids, aliphatic Polyaspartic polyurea designed to provide high gloss, UV stable (non-yellowing) and chemical resistant protection. endüra P70 is a superior, new generation product exhibiting fast cure and excellent stain resistance.

endüra P70 has very low odor and can be applied indoors in occupied areas. It is generally used as a clear, high gloss finish on eNdura high performance resin chip system.

advantages

• VOC compliant
• Fast set times
• Excellent UV resistance
• Very high gloss
• Excellent abrasion resistance
• Chemical & stain resistance
• Low odor; can be used in occupied areas