epoxy top coat

Perdüre BE58

Perdüre BE58 is a unique water-based high solids breathable (moisture vapor tolerant) epoxy flooring top coat or grout coat for various Düraamen flooring systems. It can be applied in films up to 16mils without impacting cure properties. This product is ideal for any floor or wall coating project needing a high-build coating system that is moisture vapor tolerant, durable, with a requirement for USGBC LEED certification. Typical uses include corridors, lobbies, warehouse floors, light duty manufacturing areas and various residential or commercial areas. 

The new waterborne curing agent technology offers Perdüre BE58 high film-building formulations with unique performance properties. The micro porous morphology of the epoxy thermoset network gives it the ability to “breath” over substrates with high moisture vapor transmission – a major factor in blistering of conventional epoxy coatings / sealers.

ADVANTAGES

• Breathable (moisture vapor tolerant)
• Low odor
• Meets USGBC – LEED Low VOC requirements
• Good chemical resistance
• Excellent abrasion resistance
• Long working time
• UV Stable
• Meets USDA requirements for use in federally inspected facilities

TECHNICAL DATA
Viscosity @ 75°F	600 – 1000cps
Mixing ratio	1 parts A to 2 parts B by volume
Solids Content	58% by volume
VOC	<50g/lt
Bond Strength to concrete	400-500psi (100% concrete failure)
Weight per gallon	8.75 pounds per gallon, mixed
Pot Life	25-35 minutes
Dry to touch	6 hours @ 75°F
Re-Coat	8-24 hours @ 75°F
Light Traffic	24 hours @ 75°F
‘H’ Hardness ‘5-H’ Hardness	2 Days 30 Days

Perdüre E32  

It is a water based emulsion epoxy flooring primer/sealer designed to have a maximum penetration into concrete surfaces to provide high bond strength and adhesion. Specially formulated to reduce concrete out gassing, Perdure E32 has the ability to be applied to recently poured (green) concrete and achieve excellent adhesion. Perdure E32 has very low odor and can be used in occupied areas. Ideal for both new and old concrete surfaces, Perdure E32 is used as a primer for Perdure high build and thin film coating systems.

advantages

• Low odor during application and cure
• Fast dry and re-coat time
• Easy clean-up
• Can be used on damp/green concrete
• Greatly reduces the probability of concrete out gassing

TECHNICAL DATA			CURE/DRY TIME
Viscosity @ 75°F	300 – 400cps		Pot Life	3 hours
Mixing Ratio	2 parts A to 1 parts Bby volume		Dry to Touch	4 – 6 hours @ 75°F
Solids Content	38-40% by volume		Re-Coat	6 – 24 hours @ 75°F
Volatile Organic Content	<60 gm/L		Light Traffic	24 hours @ 75°F
Bond Strength to concrete	400-500psi (100% concrete failure)		“H” hardness	2 days
Weight Per gallon	8.75 pounds per gallon, mixed		“5-H” Hardness	30 days

Perdüre E12    

It is a 100% solids epoxy flooring glaze specially formulated for excellent clarity and water-white appearance. It is resistant to ultra violet (UV) exposure. Perdure E12 provides a wear and abrasion resistant finish that resists the normal ambering of epoxy finishes. With low odor and minimal health risks, Perdure E12 is the ideal seal coat for concrete and polymer concrete overlays.

advantages

• Excellent clarity and colour retention
• Low odor during application and cure; can be applied in occupied buildings
• UV Resistant epoxy finish
• Meets USDA requirements for food handling applications

TECHNICAL DATA			CURE/DRY TIME
Viscosity @ 75°F	800 – 1000cps		Pot Life	20-30 minutes @ 75°F
Mixing Ratio	2 parts A to 1 parts B by volume		Dry to Touch	8–10 hours @ 75°F
Solids Content	100% by volume		Re-Coat	14–16 hours @ 75°F
Volatile Organic Content	0		Light Traffic	18 hours @ 75°F
Gloss, 60°F	90–100		“H” hardness	2 days
Weight Per gallon	9.00–9.20 pounds per gallon, mixed		“5-H” Hardness	5 days