Exterior concrete resurfacing

Überdek

Überdek is a single component polymer modified concrete formulated to resurface existing indoor or outdoor concrete surfaces. It is a very cost-effective solution to expensive and time consuming concrete replacement. It makes the old concrete surface to look new again. It can be applied over horizontal and vertical concrete surfaces that are worn, spalled and distressed. It is suitable for decorative trowel finishes or simply broom finishes on sidewalks, driveways, garage floors, patios, walkways, pool decks and stairs. The result is renewed surface accepting foot traffic in as little as 2 hours and rubber tire traffic within 8 hours. It is typically applied with a steel finishing trowel, squeegee, masonry brush for curbs or steps and broom finished.

ADVANTAGES

• Single component – just mix water on site
• Specialty polymers promote excellent bond to the existing concrete substrate
• Self curing, no additional curing methods needed
• Versatile - allowing for decorative trowel and broom finishes
• Demonstrates excellent freeze/thaw stability
• Compatible with most sealers, dyes and stains
• Quick turnaround, ready for foot traffic in two hours
• Provides a slip-resistant surface
• Zero VOC

RECOMMENDED USES

• Commercial and residential applications, vehicular and foot traffic
• Resurfacing Driveways, Garage floors, Patios, Pool decks and Walkways
• Textured ‘skip-trowel finishes
• Resurfacing of old concrete retaining walls
• Dressing up worn or spalled concrete to provide a brand new finish

TECHNICAL DATA
Working time	20 min @ 700F
Initial Set	60 min @ 700F
Final Set	120 min @ 700F
Mixing Water	4.0 – 5.5 quarts of water for 50lb bag
Compressive strength (ASTM C 109) 1 Day 7 Days 28 days	2400psi 3600psi 5000psi
Flexural strength	1000psi
Shelf life	12 months when properly stored

Pasto

Pasto is polymer modified cement based product specifically designed for both interior and exterior surfaces where a textured finish is desired. The textures can vary from random stone to slate to tile or wood plan finishes. It is applied at a thickness of ¼” to 3/8” in a single application. It is suited for continued exposure to commercial vehicular and pedestrian traffic. Pasto is typically used on patios, courtyards, pedestrian bridges, sidewalks, balconies, breezeways, plaza decks, pool decks, lobbies, atrium, entryways, foyers, corridors and driveways.

Advantages

• Extensive range of colors, textures, patterns and finishing techniques
• Installed at a minimum ¼” thickness to maximum of 3/8” thickness
• Can be integrally colored with Colorfast
• Achieves excellent results with chemicals stains (acid stains), dyes or water based stains
• Ideal for interior or exterior applications using conventional stamping tools
• Suitable for application over concrete in retail, commercial and residential environments

TECHNICAL DATA
Compressive Strength	5500psi
Coverage	25ft²/bag
Mixing ratio	3.78 liters of potable water per bag
Packaging	55lb
Colour	Grey and White