Perdüre A01 is a clear acrylic solution formulated to create a clear, non-yellowing protective coating that provides a tough, UV and abrasion resistant film protecting surfaces from moisture penetration, staining, dirt, dust and wear. Perdüre A01 is an excellent choice for both interior and exterior applications.
Most commonly used as a sealer for Düraamen concrete, epoxy terrazzo and polymeric terrazzo flooring systems. It is also used for sealing old and new concrete floors, exterior ramps, decks, sidewalks, slate and exposed aggregate surfaces.
| TECHNICAL DATA | |
| Viscosity @ 75°F | 950cps |
| Mixing ratio | none |
| Solids Content | 20% by volume |
| VOC | 746g/lt |
| Weight per gallon | 7.50–8.0lb/ga |
| Dry to touch | 2-6 hours @ 75°F |
| Re-Coat | 2-6 hours @ 75°F |
| Full Cure | 5 days |

Perdüre A03 is a clear acrylic emulsion formulated to create a clear, non-yellowing, protective coating. It provides a tough, UV and abrasion resistant film that protects surfaces from moisture penetration, staining, dirt, dust, wear, and provides a surface that is easy to clean and maintain. Perdüre A03 is an excellent choice for both interior and exterior applications.
The excellent water, alkali, and efflorescence resistance of this product, in combination with its exterior durability and its ability to adhere to a variety of substrates, allow it to be used in many applications. Perdüre A03 can be used to seal concrete, masonry, pavers, brick, saltillo tiles, or any cementitious substrate.
| TECHNICAL DATA | |
| Weight / gallon | 8.5 ± 2 |
| Drying time | 15-30 minutes |
| Re-Coat | 2 hour (approx.) |
| Flash point | None (seta flash) |
| pH | 8.5 – 8.9 |
| Solids Weight | 20.0% |
| Package life | 1 year, unopened |
| VOC | 0.60 gm/liter |
