installation instructions —
Kwörtz Flooring System
1/8" Double Broadcast

installation instructions 1/16" double broadcast

---

Part 1 – Information & Preparation

General Information

Kwörtz flooring system is a seamless decorative resin flooring system consisting of clear, 100% solids epoxy resin filled with a variety of graded quartz, marble or ceramic fillers which can be modified to create the best design mix for ideal performance and appearance. The installed flooring system can be textured or smooth as desired. The decorative quartz aggregates are available in a series of pre-blended patterns or solid colors.

Surface Preparation

Surface Preparation is the most critical portion of any successful resinous flooring system application. All substrates must be properly prepared as outlined in Technical Bulletin -1. Specific attention should be paid to the following:

• Concrete Placement  - An efficient vapor barrier  should be directly under slabs on or below grade to prevent moisture migration
• Curing and Finishing techniques of the concrete substrate
• Age of concrete
• Previous contamination of the substrate
• Present condition of the substrate
• Make sure the floor is free of moisture vapor transmission

Also, the temperature conditions of the area to receive the flooring system should be checked. An optimum room temperature of 75°F with a slab temperature of 50°F is required for proper cure of the resin flooring system.

Material Quantities

Guideline System Requirements for 1000ft2 – 1/8” double BROADCAST
Perdüre E02	100% solids epoxy primer	4.0 gal
Perdüre E10b	100% solids epoxy body coat (seed coat)	10-12 gal
Kwörtz	For full broadcast	500 lbs
Perdüre E10b	100% solids epoxy body coat	10-12 gal
Perdüre E10b	100% solids epoxy coating (optional seal coat)	5-8 gal
Perdüre U50c	Solvent based polyurethane top coat	3-4 gal

Coverage rate varies depending upon the desired finish texture

For high chemical resistance flooring system, replace Perdüre E10 with Perdüre NE33, 100% solids Novolac epoxy coating

Alternate topcoats

Perdüre P70, Perdüre U45, Perdüre U46

Page 1 of 4 >>